SaPader uses an innovative vertical printing system design and manufactured in Germany to the highest quality.

It utilises an inkjet system to print on virtually any vertical surface, regardless of material and unevenness.

Because we print directly on the wall there is no need for any stencils, foils or vinyl and so no wastage.

It works quickly, cleanly and quietly.

You can absolutely use your own images for printing with SaPader, or you can choose from one of the many online sites offering free or paid for imagery. See the images page on our website for inspiration and image sources. 

If you choose to use your own image, we will need to review it to ensure it is suitable for printing at your desired size.

SaPader can print on a wide range of surfaces, including painted walls, concrete, brick, wood, glass, metal and more. 

The surface should be clean and smooth for the best possible print result, but great affects can also be achieved on textured surfaces.

The wall printer also easily masters walls with holes and cracks. The built-in laser sensor system compensates for unevenness up to a difference of up to 10 cm.

You can charge $20 to $50 per square meter for most projects, depending on the complexity and the market.

Yes, SaPader printer uses lasers to keep the print head the correct distance from the wall, and the unit has built in steering capability to follow a curved wall.

Prints can be removed by painting over them or using fine-grit sanding, depending on the surface.

Yes, within reason, the ink dries within milliseconds and is abrasion resistant, waterproof and solvent-resistant.

Indoors we expect images to retain their colour for 10 years or more.

The UV inks are produced in Europe specifically for SaPader, and like all components of the SaPader ecosystem, they were developed under the highest environmental standards. 

The inks are ideal for wall printing because they cure within milliseconds and are instantly scratch and abrasion-resistant.

As it is sterile and abrasion-resistant, walls in children's rooms, doctors' surgeries and historic preservation areas can also be printed without any worries.

Printing height: The vertical axis is extremely flexible as it can be extended in 10 cm increments. The lowest ceiling height for using SaPader is 1.7 m (5 ft 6" ). After that, the axis can optionally be extended up to 4 m (13 ft) print height in 10 cm (4 in) increments.

Print width: unlimited

Due to the limitations of inkjet technology, there are margins in corners to adjacent walls, floor and ceiling. These are 6 cm (2.3″) on the left, 10 cm (3.3″) on the right, 25 cm (9.8″) on the top, and 25 cm (9.8″) on the bottom.

It can print on nearly any vertical surface, including drywall, wood, metal, glass, brick, Fabric, concrete, leather tile, and more.